In recent years, the domestic mobile phone manufacturers have become more and more powerful. It can be said that they are more and more intensive. From the flagship to the thousand yuan machine, from the small screen to the big screen to the middle screen, the product division is getting more and more fine. In addition to mobile phones, another accessory product is getting more and more attention from manufacturers. It is the earphone that is not given as a standard accessory for mobile phones. When manufacturers have slogans such as dynamic ring iron headphones, glory produced engine headphones. Also ushered in the second generation of products - glory engine headset 2.
The box of the Glory Engine Headphone 2 uses a round plastic storage box. Three earplugs are available for large, medium and small models.
Compared to the sleek bullet shape of the previous generation, the engine earphone 2 adopts a cylinder shape that looks more conservative. The metal outside the sound chamber is spliced â€‹â€‹with several pieces of metal, and the metal near the earphone wire is brushed. The parts close to the earplugs are treated with metal blasting. Fortunately, the splicing of this different treatment method does not bring a sense of disobedience. The metal in the butt position of the earphone is treated with concentric circles. Headphones add a lot of color.
Glory Engine Headphones 2 Wire is a noodle form TEP material. The advantage of this material is that it has good toughness and good texture. But it will be slightly cheaper in terms of look and feel.
The core is made of LC-0FC linear crystal oxygen-free copper, which can bring better conductivity.
Although the earphones are made of metal, the weight control is light, and it does not put too much pressure on the ear canal. It is comfortable to wear. However, it may be because the wire material is hard, which leads to walking in the earphones. There will always be a feeling of falling.
Regarding the audio performance of the glory engine headset 2, first of all, the vocal voice, the glory of the vocal performance of the engine headset 2 can be said to be just right. Take "Yoko" as an example, when Su Yunying opened, the phrase "how the wind is more and more "It really blows up a goose bump. The whole song shows that the low-frequency dive is soft and not stiff, but it is powerful at high frequencies. Although it is satisfactory in the performance of the human voice, it is the engine of glory in resolution. Headphones 2 are slightly incompetent. When listening to music with more instruments, this deficiency will appear and there will be a little bit of feeling. So I think the glory engine headset 2 is more suitable for listening to pure music.
In fact, the most powerful part of the glory engine headset 2 is the use of physical tuning, by rotating the inner and outer double-layer rotating structure to change the ventilation area of â€‹â€‹the sound vent hole, thereby achieving the air volume adjustment of the front cavity, thereby achieving between the Normal and Bass files. Switching, it is really not easy to make a large change in the playing style by adjusting the air permeability area on such a small sound hole. The normal frequency of each frequency band is balanced and more suitable for pure music, and Bass The file will bring more powerful bass power.
For the sound quality part, it is the most subjective part. The sound quality is like the retina screen and the 480P screen. When you are used to the retina screen and then return to 480P, it is full of graininess.
In the spirit of technology as the attitude, I finally dismantled it. To praise the work of glory, the workmanship of the headphones is very fine, I feel that I can't start, I can only start with the screw inside the pentagonal. The metal is spliced, but it takes a lot of effort to disassemble it.
When the metal patch is completely disassembled, it will be found that the sound cavity part of the earphone is a fully sealed plastic material, which can bring a higher sealing property, and the gap between the gaps is also glued and tightly stitched. The strength of the two tigers is hard to open the sound cavity, which also causes the headphones to almost never go back.
For the sounding unit, the Glory Engine Headphone 2 uses a large sounding unit. Because it has to be violently dismantled at the end, the diaphragm will almost fall off when it is removed.
ã€€ ã€€ ã€€
Regarding the glory engine headset 2, I think it still represents the quality of glory, solid workmanship and excellent sound quality make it quite competitive, not to mention the disgusting words of hundreds of thousands of headphones. In all fairness, if you want to recommend a headset of less than two hundred, it is definitely worth recommending.
Micro and Nano Controllers
When you need an even greater productivity
boost, the Micro Plus controllers
are designed with the same high quality
as the Micro line of controllers, but have
enhanced features such as more memory,
high precision motion and an advanced
instruction set. They support a user friendly
Memory Module that can easily connect
to the controller to download the latest
program changes without the need of a
PC. Online programming enables the user
to easily modify logic without stopping the
controller. Flexible communications is also
the strength of the Micro Plus controllers
with both serial and Ethernet options.
VersaMax Nano PLC
Versamax Nano Plc,Versamax Nano Micro Plc,Ge Versamax Nano Micro Plc,Ge Fanuc Plc Versamax
Xiamen The Anaswers Trade Co,.LTD , http://www.answersplc.com