LED Lighting Bar Profile for Cabinet

Model NO.: DT-SZ03
Life(h): 30000
Voltage: 24V
IP Rating: IP44
Certification: CE
Width: 10mm
Power: 18W
LED: 90PCS/M
Trademark: Delton
Specification: CE, RoHs
Origin: Shangha, China
HS Code: 9405500000
Model NO.: DT-SZ03
Life(h): 30000
Voltage: 24V
IP Rating: IP44
Certification: CE
Width: 10mm
Power: 18W
LED: 90PCS/M
Trademark: Delton
Specification: CE, RoHs
Origin: Shangha, China
HS Code: 9405500000
Constant Current SMD2835 24V LED Strip Light with Aluminium Housing


1. LED Strip: Rigid LED Srtip
2. Quantity of LED:90pcs/Meter
3. Design:6 pieces of LED on one group and there are totally 15 groups on one meter strip.
4. The strip is designed to constant current of 40mA to reach a stable .luminance
    Common not constant-current strips are also avaliable with a lower price if required.
5. Power: 18W.
6. Input Voltage: 24V
7. Strip width: 10mm. Other width from 5mm to 15mm are avaliable.Special width above 15mm needs to        be discussed.
8. Color Temperature: 2700-10000K
9. IP 44, non-waterproof. Indoor Application only.
10. Lifespan: 30000hours
11.Product Warranty: 2 years
12.Aluminium housing::Pentagon Aluminium Slot Housing. Other aluminium housing are avaliable.
13.Light Transmission Lens:PMMA(Acrylic). It can be transparent or frosted.

LED Lighting Bar Profile for Cabinet
14. Mounting Method:
       1): Mount on two end: Two ends with caps of mounting holes. The housing will be mounted by screw                 through the mounting holes.
        2): Mounting in the back of housing: The housing will be equiped with installing component with                         mounting on it. The screw can go through the mounting hole to install the whole light and                               aluminium slot.
        3): Two ends can be supplied with two wires to connect the DC24V. Or a female and male joint can                   be supplied on two ends to connect the strips along.

Applications:
1) Architectural decorative lighting
2) Archway, canopy and bridge edge lighting
3) Amusement park, theater and aircraft cabin mood lighting
4) Emergency hallway lighting
5) Auditorium walkway lighting
6) Stairway accent lighting
7) Concealed lighting
8) Backlighting for signage letters
9) Channel letter lighting
10) Emergency exit path lighting
11) Cove lighting
12) Edge-lit acrylic panel lighting
LED Lighting Bar Profile for Cabinet
Trade Term:
1. Payment Term: 30% pre-payment and the balance T/T, Paypal or L/C(if necessary) against the delivery.
2. Delivery Time: 7-30 days.
3. Sample: Avaliable
4. Sample Delivery Time: In 2-15 days
5. Sample Fee: Yes

Common LED Strip Light Specification:
     LED    LED Quantity         Power         Strip Width     Input Voltage  Color Temperature
SMD3528  60/90/120 PCS/M   4.8/7.2/9.6W   4/5/8/10/12/15mm   DC12V   DC24V     2700-10000K
SMD2835      60/ 90 PCS/M     12W/18W   4/5/8/10/12/15mm   DC12V   DC24V     2700-10000K
SMD5050  48/ 60/ 72 PCS/M  11.5/14.4/17W   4/5/8/10/12/15mm   DC12V   DC24V     2700-10000K
SMD5630      36/48PCS/M     17.2/23W   4/5/8/10/12/15mm            DC24V     2700-10000K
Constant Current SMD2835 24V LED Strip Light with Aluminium Housing


1. LED Strip: Rigid LED Srtip
2. Quantity of LED:90pcs/Meter
3. Design:6 pieces of LED on one group and there are totally 15 groups on one meter strip.
4. The strip is designed to constant current of 40mA to reach a stable .luminance
    Common not constant-current strips are also avaliable with a lower price if required.
5. Power: 18W.
6. Input Voltage: 24V
7. Strip width: 10mm. Other width from 5mm to 15mm are avaliable.Special width above 15mm needs to        be discussed.
8. Color Temperature: 2700-10000K
9. IP 44, non-waterproof. Indoor Application only.
10. Lifespan: 30000hours
11.Product Warranty: 2 years
12.Aluminium housing::Pentagon Aluminium Slot Housing. Other aluminium housing are avaliable.
13.Light Transmission Lens:PMMA(Acrylic). It can be transparent or frosted.

LED Lighting Bar Profile for Cabinet
14. Mounting Method:
       1): Mount on two end: Two ends with caps of mounting holes. The housing will be mounted by screw                 through the mounting holes.
        2): Mounting in the back of housing: The housing will be equiped with installing component with                         mounting on it. The screw can go through the mounting hole to install the whole light and                               aluminium slot.
        3): Two ends can be supplied with two wires to connect the DC24V. Or a female and male joint can                   be supplied on two ends to connect the strips along.

Applications:
1) Architectural decorative lighting
2) Archway, canopy and bridge edge lighting
3) Amusement park, theater and aircraft cabin mood lighting
4) Emergency hallway lighting
5) Auditorium walkway lighting
6) Stairway accent lighting
7) Concealed lighting
8) Backlighting for signage letters
9) Channel letter lighting
10) Emergency exit path lighting
11) Cove lighting
12) Edge-lit acrylic panel lighting
LED Lighting Bar Profile for Cabinet
Trade Term:
1. Payment Term: 30% pre-payment and the balance T/T, Paypal or L/C(if necessary) against the delivery.
2. Delivery Time: 7-30 days.
3. Sample: Avaliable
4. Sample Delivery Time: In 2-15 days
5. Sample Fee: Yes

Common LED Strip Light Specification:
     LED    LED Quantity         Power         Strip Width     Input Voltage  Color Temperature
SMD3528  60/90/120 PCS/M   4.8/7.2/9.6W   4/5/8/10/12/15mm   DC12V   DC24V     2700-10000K
SMD2835      60/ 90 PCS/M     12W/18W   4/5/8/10/12/15mm   DC12V   DC24V     2700-10000K
SMD5050  48/ 60/ 72 PCS/M  11.5/14.4/17W   4/5/8/10/12/15mm   DC12V   DC24V     2700-10000K
SMD5630      36/48PCS/M     17.2/23W   4/5/8/10/12/15mm            DC24V     2700-10000K

Bending beam load cells are the most widely used types of load cells. Read this article to learn more about the benefits and properties of bending beams.


How does a bending beam Load Cell work?

During a measurement, weight acts on the load cell's metal spring element and causes elastic deformation. This strain (positive or negative) is converted into an electrical signal by a strain gauge (SG) installed on the spring element. The simplest type of load cell is a bending beam with a strain gauge. Often the (mandatory) basic components, i.e. spring element and strain gauge are complemented with additional elements (housing, sealing elements, etc.) protecting the strain gauge elements.


Shear Beam Load Cell

Shear Beam Load Cell,Shear Beam Load Transducer,Shear Beam Load Cell 5Ton,Shear Beam Weighing Load Cell

Fibos Measurement Technology (Changzhou) Co., Ltd. , http://www.fibos-sensor.com